
We ordered the BKTSQD multicolor shorts collection in five prints — aurora, geometric, flame, wave and abstract — plus a second pair in XXL to stretch the size run. Six pairs came through an agent and were opened on the Rotterdam bench by two editors. The listing itself is thin: no buyer reviews, no fabric weight, and a 0.00 kg figure in the seller's own weight field. So the bench work had to answer the two questions the catalogue actually raises. Does "quick-dry polyester" mean anything measurable, and can the size chart be trusted at S–XXL?
The short version of what the row contains: SKU 7720535002, $10.15 against a struck-through $12.07 at the time we ordered, in stock, unisex adult sizing across S, M, L, XL and XXL, a polyester shell, a polyester lining, a mid-rise elastic waist with a drawstring, a loose straight leg, and a stated 1–3 cm measurement tolerance. No calipers were needed for this one; a tape measure, the postal scale and a stopwatch did the work.
What arrived, and what we could actually measure
- Six pairs: five prints in size L, one abstract in XXL.
- Shell and lining both labelled polyester; the spec row translates as no inner liner, meaning no built-in brief.
- Drawstring threaded through a continuous channel, with a small B logo on the lower leg of each pair.
- No printed care label in the waistband of the pairs we opened — the wash instruction below is ours, not the seller's.
- Weight per pair on our scale: 146–151 g in size L, which is consistent with a thin shell plus a thin lining.
The quick-dry claim, timed
We soaked each pair for ten minutes in 20 °C tap water, hand-wrung it three times, and hung it on a line indoors at 21 °C and 52% relative humidity with a desk fan a metre away. No spin cycle, because a spin flatters any fabric. Touch-dry was defined as no cool feel at the waistband and hem fold, plus a scale weight within 2% of the dry figure. The lining was checked separately by turning the leg inside out.
| Print (size L) | Dry weight | Shell touch-dry | Lining fully dry |
|---|---|---|---|
| Aurora | 146 g | 42 min | 55 min |
| Wave | 148 g | 44 min | 57 min |
| Abstract | 147 g | 47 min | 60 min |
| Geometric | 151 g | 50 min | 64 min |
| Flame | 149 g | 55 min | 68 min |
The shell is the fast part. It sheds surface water quickly and felt dry to the hand well before the scale agreed. The doubled waistband and the sewn-in polyester lining are what hold the moisture, which is why the garment as a whole lands near the hour mark rather than the twenty-minute figure most people read into "quick-dry". For a gym bag or a post-run change that is perfectly usable. For a second session ninety minutes later, plan around the lining.
Two washes, and what came off on the blotter
Each pair went through two 30 °C, 40-minute cycles with mild liquid detergent and no softener, then line-dried. We pressed a white cotton blotter against the damp hem fold and side seam for 60 seconds after each wash. No print changed shape, cracked at the fold, or lost its edge registration — the flame and geometric motifs still lined up across the seam as they did out of the parcel.
Two pairs did leave a mark. The flame print transferred a faint pinkish stain to the blotter at the hem after the first wash, and the geometric print did the same at the side seam; both were noticeably weaker after the second cycle. Nothing showed on the shorts themselves. Treat the first wash as a separate-load job and keep these two away from pale cotton until the second cycle is done.
Flat measurements and the size-chart delta
We took flat measurements across the waist, front rise, inseam, outseam and hem opening, then compared them with the chart displayed on the listing when we ordered. The waist was measured relaxed and again pulled to the point where the elastic clearly resisted.
| Measure (cm) | Chart, L | Measured, L | Delta | Chart, XXL | Measured, XXL | Delta |
|---|---|---|---|---|---|---|
| Waist, flat relaxed | 76 | 78.5 | +2.5 | 84 | 87.0 | +3.0 |
| Front rise | 30 | 31.0 | +1.0 | 32 | 33.5 | +1.5 |
| Inseam | 17 | 17.5 | +0.5 | 18 | 18.5 | +0.5 |
| Outseam | 45 | 45.5 | +0.5 | 48 | 49.0 | +1.0 |
| Hem opening, flat | 30 | 31.5 | +1.5 | 33 | 34.5 | +1.5 |
Every measurement came in over the chart, and the XXL waist sat right at the top of the seller's own 1–3 cm tolerance. That bias matters more than the raw numbers: if you are between sizes, the chart will not save you, and sizing down puts you closer to the labelled fit than sizing up. The rise is genuinely mid — it sits at the hip bone rather than the natural waist — and the leg is loose and straight with no taper at the hem, which is why the hem opening grows only 3 cm from L to XXL.
The two-layer question: a lining, not a brief
The English description says "no inner lining" while also listing a polyester lining, which reads as a contradiction until you check the Chinese spec row. It says no inner brief. Both statements are true of the garment we received: there is a sewn-in polyester lining fabric against the skin, and there is no brief, mesh or otherwise. So the shorts offer no support and need your own underwear, and the lining adds a small amount of weight and roughly a quarter of an hour to the dry time. What it does do is make the inside seam feel smooth on a longer run, which we noticed at kilometre four of a 6 km easy effort in 14 °C drizzle more than we expected to.
Three rows in the spreadsheet, side by side
Our category tab holds two nearby rows we have also measured on the same bench: a plain unlined polyester short at $7.80 (sizes S–XL) and a mesh-brief sport short at $13.60 (sizes M–XXL). Neither is a substitute for the BKTSQD print range, but they frame the price.
| BKTSQD multicolor (L) | Row 214, plain short (L) | Row 231, mesh-brief short (L) | |
|---|---|---|---|
| Price | $10.15 | $7.80 | $13.60 |
| Shell | Polyester, tight hand | Polyester, thinner hand | Polyester, textured |
| Second layer | Polyester lining, no brief | None | Polyester mesh brief |
| Waist, flat (cm) | 78.5 | 77.0 | 79.0 |
| Inseam (cm) | 17.5 | 16.0 | 18.0 |
| Hem opening (cm) | 31.5 | 29.0 | 30.0 |
| Shell touch-dry | 42–55 min | 34 min | 48 min |
| Sizes | S–XXL | S–XL | M–XXL |
| Print options | Five families | Three solids | Two solids |
The BKTSQD row is the middle price and the widest size and print range. It loses to the plain short on dry time and loses to the mesh-brief row on support, but it is the only one of the three that gives you five prints in a genuinely loose straight leg up to XXL. If the print is the reason you are looking, that is a fair trade at $10.15; if you need a brief or the fastest possible dry, it is not.
The season claim, briefly
The spec row lists spring, summer, autumn and winter. In a Rotterdam July and in a warm gym, that is accurate. In January, with no brief and a thin shell, these are a base-layer-dependent short at best; we would not treat the four-season line as a winter recommendation.
Before you order
- Measure a short you already own flat across the waist, front rise and hem, and match those numbers to the chart with the upward bias in mind.
- Decide about support first. There is no brief here, so budget for underwear you can run in.
- Wash the flame and geometric prints separately for the first cycle, and keep them off pale cotton while damp.
- Plan on roughly an hour of line-dry time for the whole garment, not twenty minutes.
- Note that the listing carries no buyer feedback, so fit and fabric judgements rest on the chart and on what we measured here.